Manual

Manual – TopCon TC.GSS
Control group
TopControl application
Tab –
1
3
Fig. 121 “Control” group on the tab and its submenus.
“Control” group – parameters
1
2
3
4
, button
Starts the recording process
Button changes to
TopControl waits for a trigger event,
see “Trigger” group Table 110, Seite 216.
Stops the recording process
Button changes to
, button
Starts the transfer and indication of the data recorded from the TC.GSS power
supply to the TopControl application.
, button
Opens the “SCOPE option” window with automation options.
Meaning of the check boxes if they are selected:
“Auto upload...” Transfer the data immediately from the TC.GSS power supply
to the TopControl application. (Recommended)
“Auto restart...” Recording is repeated immediately.
Optional restriction: only with trigger set
“Hide reference channels...”
The related reference signal for deactivated signal channel
is hidden. (Recommended)
“Reset zoom after uploading data...”
Indication is reset when new data are uploaded.
, button
Opens the submenu for editing -5-, -6-, -7-, -8-, -9-.
1 Scope file is included in the list box. See Fig. 115, Seite 201.
The table is continued on the next page.
2011-10-18 213 / 298 V00.05b
2
4
7
5
6
7
8
9