Manual

Manual – TopCon TC.GSS
7.4.8.5. Tab –
TopControl application
Tab –
User level: from Advanced User
The “CONFIG” (Configuration) tab contains various parameter fields
with which the power supply‟s internal values can be changed.
For instance the parameters for the P, I and D control terms can be displayed,
internal filters and the behaviour on load shedding modified. Also
the behaviour in relation to sense errors can be configured.
The controller parameters are set from the factory such that they cover
a load range as large as possible. If necessary, these parameters can
be adapted to special loads to optimise the controller dynamic behaviour.
If necessary the parameters can be optimised on site by experts from
the sales partner or the manufacturer.
1 4
2
3 8
Fig. 126 tab – parameters.
2011-10-18 219 / 298 V00.05b
5
6
7
7