Manual

Manual – TopCon TC.GSS
Single device operation – special aspects
CAN communication (X101/102)
4.3.2.2. Establishment of communication connection
TopCon with/without HMI and RCU
In the following the configuration of a TopCon power supply and its peripheral
devices is considered.
With the possible combinations of HMI and RCU, there are 4 standard
configurations for a TopCon power supply.
For further information on multi-unit systems with at least 2 or more
TopCon TC.GSS power supplies, see from chapter 4.4.3, page 59.
No. Function
TopCon
Netzgerät
mit HMI
RCU
ON
OF F
X102 X101
X105 X102 X101
X105 X 102 X101
+
-
TopCon
Netzgerät
ohne HMI
2011-10-18 47 / 298 V00.05b
1
2
RCU
TopCon
TopCon
Netzgerät
Netzgerät
mit HMI -
ohne HMI
+
1
4
3
2
Fig. 25 Circuit diagram for TopCon with HMI (left)
and without HMI (right).
Dummy plug
used
1 “Interlock” + “CAN TERM” Dummy plug X101
ON
OF F
X102 X101
X105 X102 X101
X105 X 102 X101
+
-
+
-
4
1
2
1
4
3
2
Device Interface
TopCon
RCU
X101
2 “Interlock” Dummy plug X105 TopCon X105
3 “CAN TERM” Dummy plug X102 TopCon X102
4 “CAN CABLE” ---
Table 18 Allocation of components to chapter 4.3.2.1, page 46.
TopCon
RCU
X101/
X102