Manual

Manual – TopCon TC.GSS
TopControl application
Tab –
Navigation in the scope display
Within the display it is possible to navigate, measure and zoom in/out
using the mouse, the keyboard or a combination of both. The position is
indicated using a cursor.
5
Fig. 116 Indication of the cursor position in the scope display.
The actual position of the cursor -5- in the scope display can be seen
from red cross-wires -1-. The Y axis position is indicated for each channel
-2-, -3-, -4-. The X position for the time axis is equally applicable to
all signals recorded.
The zoom functions
Element Function in the graphic
Hold left mouse button +
drag diagonally
2011-10-18 202 / 298 V00.05b
1
2
3
4
7
Zoom box is drawn and the display correspondingly
zoomed on releasing the mouse
button.
Up to 5 zoom settings are possible.
Click right mouse button Reset zoom one setting.
Previous view
back to the original view.
Turn mouse wheel
(forward/backward)
[Ctrl] +
turn mouse wheel
(forward/backward)
[Shift] +
Turn mouse wheel
(forward/backward)
Hold right mouse button + drag
Condition:
Zoom function already in use
Table 99 Zoom functions in the scope display.
Zoom in/zoom out in X and Y direction
Zoom in/zoom out in X direction
Zoom in/zoom out in Y direction
Move the area displayed as a function of the
cursor movement.