Manual

Manual – TopCon TC.GSS
TopControl application
Tab –
“Time resolution” and “#sampl. points” groups
1 2
Fig. 124 “Time resolution” and “#sampl. points” groups.
“Time resolution”/“#sample points” groups – parameters
1
2
3
4
#sampl.points, text box
Number of measurement points (MP) on a signal curve that are saved.
The more measurement points are saved, the longer the transfer from the
memory from the memory in the TopCon to TopControl will take.
Value range: 1 – 1024 MP; default: 1024 MP; step width: 1 MP
Time resolution, text box
Period between two measurement points -1-
The value range is dependent on the unit selected -3-
Value range: 50 µs – 3276.75 min.
Time resolution, list box
Selection between ms, s, min.
Record time, read-only indication
The maximum recording time is the product of “Time resolution” -2- and
“#sample. points” -1-
Table 111 Parameters for the “Time resolution” and “#sample.points” groups.
2011-10-18 217 / 298 V00.05b
4
7
3