Manual

Manual – TopCon TC.GSS
7.4.8.1. Tab –
TopControl application
Tab –
User level: from Standard User
You can specify on the tab the set values (presets) for
the outputs; the actual values along with the possible errors and warnings
are displayed.
Tab – CONTROL
1
2
3
2011-10-18 175 / 298 V00.05b
1
5 4
6
Fig. 96 Parameters on the tab.
Output, indication of actual values
Output Voltage, Output Current, Output Power, Internal resistance
Controller indicator: See -8-, red indication ≙ Normal indication
9
Preset, text boxes for set values (reference values) for Q1
Voltage preset, Current preset, Power preset, Resistance preset
The related maximum value for the input is dependent on the limit value set on
the tab, chapter 7.4.8.6, Seite 226.
Limit Q4
Current limit Q4 and Power limit Q4
Specification of the regenerative current and regenerative power
The related maximum value for the input is dependent on the limit value set on
the tab, chapter 7.4.8.6, page 226.
The table is continued on the next page.
2
3
7
8
7