Manual

Manual – TopCon TC.GSS
Installation and commissioning
Commissioning
Electromagnetic compatibility
TopCon TC.GSS power supplies have interference protection and
suppression filters on all power and signal connections such that, on
correct installation, compliance is achieved with the applicable IEC and
EN standards in relation to interference.
The following standards are applicable:
Interference immunity: EN 61000-6-2
Interference emission: EN 61000-6-4
For the interference protection components to be able to perform their
function, the following conditions must apply:
Large area earthing suitable for EMI.
Shield mains and load connection.
(Depending on load and installation situation)
Connect both ends of shields to earth.
(Depending on load and installation situation)
Interference immunity
The system must be fully earthed (encompassing all parts) and earthed
suitable for EMI.
Correct earthing and shielding of the cable connections are key
elements for interference immunity.
All cable shields must be connected to earth potential at both
ends using large area connections.
Ideally shielded connectors are used that are earthed directly via
the earthed sockets on the electrical power supply.
Star topology earthing (suitable for EMI) of the device.
Interference suppression
TopCon TC.GSS power supplies have integrated interference suppression.
For the interference protection components to be able to perform
their function, the following conditions must apply:
Large area earthing suitable for EMI.
Shield mains and load connection.
Depending on load and installation situation.
Connect both ends of shields to earth.
Depending on load and installation situation.
2011-10-18 111 / 298 V00.05b
6