Manual

Manual – TopCon TC.GSS
TopControl application
Tab –
The following combinations of the -4- and
-5- entries from Table 115, Seite 224 yield
the following matrix.
1
2011-10-18 225 / 298 V00.05b
2
3
Fig. 129 Example multi-unit operation of TC.GSS power supplies.
It is not possible to determine the position of the master device
from the matrix illustration. However, the master device always has
the address AH= 0 and AL=0.
Configuration of devices in a multi-unit system - examples
Setting
4 serial
devices
4 parallel
devices
2x2 devices
as matrix
4
7
3x2 devices
as matrix
-1- -2- -3- -4-
4 1 2 3
1 4 2 2
Table 116 Example entries for multi-unit system configuration.