Manual

Manual – TopCon TC.GSS
Categorisation of the hazard areas
Transport area
On lifting the system using a crane:
In any circumstance it is recommended to attach blocks of wood to the
corners of the cabinet to prevent twisting/distortion of the cabinet structure
(see Fig. 10).
Fig. 10 Usage of blocks of wood as protection against mechanical damage
(lifting using 2 (better 3) carrying straps)
It is imperative you remove all cable connections prior to moving
the system!
Note that between switching off the power supply and disconnecting
the power cables on the output side, it is necessary to
wait at least 15 min for discharging.
Keep all doors closed during the transport of cabinets.
Pay attention to protruding parts such as main switch, controls
and fan covers. They must not be damaged by transport aids
(straps, blocks of wood, etc.).
2011-10-18 26 / 298 V00.05b
2