Manual

Manual – TopCon TC.GSS
HMI and RCU
Operation of the HMI (option)/RCU (option)
7.3.4. Operation of the HMI (option)/RCU (option)
7.3.4.1. Controls on the HMI/RCU
Fig. 69 Controls for the optional HMI (or the RCU).
Standard controls (cf. Fig. 12)
1
2
3
4
5
6
7
8
LC display
Indication of the actual device settings and various menus
160x80 pixels, font: black, background: blue-grey
constant LED background lighting, contrast can be selected
Buzzer
, rotary selector switch
Mechanical rotary encoder with detent and integrated button.
For the selection of menu items and scaling of parameters.
, button
Cycles entire main window.
, button
Leaves the actual window and return to the next level up in the hierarchy. Acknowledges
error messages and warnings.
, button
Opens the main menu.
, switch
ON: Green LED illuminated. In the operating state the output value
set is present at the device output.
OFF: Green LED is off, device output is electrically isolated
, switch
Change over as to whether the TC.GSS power supply is to be remotely controlled.
Deactivated: Red LED off. HMI is ready for entries.
Activated: Red LED illuminated. HMI is remotely controlled and indicates
the device state.
, button
In case of multiple page menus for data entry used to jump to next page.
Table 50 Controls on the HMI or RCU.
1 2
3 4 5
8 7 6
2011-10-18 134 / 298 V00.05b
7