Manual

Manual – TopCon TC.GSS
Creating AAP functions
TopControl application
Tab –
Unlike the so-called “user-defined functions” considered up to now,
which describe reference values in relation to time, in the AAP area the
dependency of one reference value in relation to another is considered.
The AAP characteristic curve is created with the aid of the TopControl
application (or using a custom program). Points can also be loaded via
a CSV file.
If you import function parameters via a CSV file, pay attention to the data
series you have defined as the reference values for the input
(X axis) and the output (Y axis) so that you obtain the desired result.
The window for editing AAP curves has a similar structure to the window
for user-defined functions and has the same functionality.
The various areas of the editor window are described below. For explanations
on the remaining controls, please refer to “Creating userdefined
functions”,see Table 95, Seite 196.
5
3
2011-10-18 197 / 298 V00.05b
1
Fig. 112 Function generator example for creating an AAP function.
4
2
7