Manual

Manual – TopCon TC.GSS
3. Layout and function
Overview of the function
Safety pictograms used
Area related to interaction with the system
The development, optimisation and testing of modern energy storage
systems is increasingly demanding programmable active
feed/regeneration systems. More and more, significant amounts of energy
are handled such that the dissipative conversion into heat losses
does not represent a sensible alternative to power regeneration.
The TopCon TC.GSS series is the first fully digital power supply that
controls both energy directions for feeding the load and regeneration
from the load.
Examples of possible applications:
Testing and evaluating battery systems
Developing and debugging drive trains
Simulation of on-board power systems for road vehicles and aircraft
Test systems for electrical propulsion drives, lifts, cranes, light
railways
Evaluation and tests on hybrid concepts
Electrical processes in process engineering
Topology – inside the device
1 2 3 4 5 6 7 8
-1- MAINS; -2- FILTER; -3- PFC/ RECTIFIER/ INVERTER;
-4- DC INTERMEDIATE CIRCUIT; -5- RECTIFIER/ INVERTER;
-6- TRANSFORMER; -7- RECTIFIER/ INVERTER;
-8- OUTPUT FILTER
The new device series is based on the latest concepts and by means of
the multiple utilisation of the power stages ensures optimum performance
and compactness. The high frequency regeneration inverter/rectifier
eliminates the familiar problems with passive 6-pulse rectifiers
during feeding operation (PFC functionality). Due to the medium
frequency transformer coupling, complete isolation between mains and
DC load circuit is achieved.
2011-10-18 30 / 298 V00.05b
+
-
3