Manual

Manual – TopCon TC.GSS
1s
Appendix
Error list
Error and warning indication on the front panel LEDs
10
The number of flashes indicates the possible reasons for the malfunction
(group error and detail error). The following illustration shows a
period in the indication cycle.
0.2s
2s 1.5s
0.2s
Start 1 2 3 nG Pause 1 2 3 4 5 nD Pause Start
Gruppenfehlercode
Detailfehlercode
Errors are indicted via the red ERROR LED; warnings via the yellow
STATUS LED.
Error codes and warning codes are identical. All errors and warnings
are output one after the other based on the scheme above. Then the
flashing sequence starts again with the first error or first warning.
The chapter Overview of detail errors and detail warning codes lists all
flashing codes and provides information on the reason for the error and
how to rectify it.
2011-10-18 276 / 298 V00.05b
1s