Manual

Manual – TopCon TC.GSS
10.1.2. Leakage current
Appendix
Technical data
10
The following leakage current events are produced by the correct
function of the mains filter.
Leakage current
condition
“Voltage ON”
without load
“Voltage ON”
with full load
Total
leakage
current
Frequency range
50 Hz ≤ 100 Hz 150 Hz ≤ 1 kHz > 1 kHz
100 mA 1 mA 2 mA 2 mA 3 mA 100 mA
114 mA 5 mA 5 mA 1 mA 6 mA 114 mA
Table 135Leakage current – Measured result on a TC.GSS power supply with 32 kW XXXX
(still needs to be expanded) with no load and with load.
If you want to use an earth leakage trip, use a device with an expanded
frequency range.
Please take note of the varying requirements for protection against fire
and the protection of individuals.
Regatron recommends the usage of an earth leakage circuit breaker
sensitive to AC and DC leakage currents.
2011-10-18 263 / 298 V00.05b