Manual

Manual – TopCon TC.GSS
Operation of the HMI (option)/RCU (option)
Function generator – DISPLAY 23
Function Sequence – DISPLAY 31 (continued)
5
6
Repeat delay
Waiting time between function block repetitions.
Value range: 0 - 650 s; step width: 0.01 s ; default: 0 s
Trigger now, menu item
Manual trigger, starts a function block.
(Press the JogDial)
Conditions:
Trigger -2- is set to “Manual”.
The device is switched on (voltage on).
Table 63 Function generator – function sequence blocks – DISPLAY 23
2011-10-18 150 / 298 V00.05b
7