Manual

Manual – TopCon TC.GSS
Controls and displays
Elements of the TopCon TC.GSS standard interface
4. Controls and displays and operating modes
4.1. Controls and displays
4.1.1. Elements of the TopCon TC.GSS standard interface
1
2 3 4
Fig. 11 Standard controls on the front side of the device.
Standard controls (cf. Fig. 11)
1
2
3
4
Device address selection switch
For multi-unit operation
Standard: covered by plastic caps
AH: Upper address range
AL: Lower address range
RS-232, interface
For operation via a PC using the TopControl application
see chapter 7.4.3.1, page 160.
DEVICE, LED indicator
Indication of the device status
Green: POWER
Yellow: STATUS/WARNING
Red: ERROR
CONTROL, LED indicator
Green LED illuminates in front of the related label for the operating state:
VOLTAGE: Voltage control
CURRENT: Current control
POWER: Power control
Table 13 Overview of the standard controls.
2011-10-18 31 / 298 V00.05b
4