Manual

Manual – TopCon TC.GSS
TopControl application
Tab –
Reference values group – “Ref.values”
siCTR_Ref
ImoduleAfterLimits
siCTR_RefIsystem
siCTR_Ref
PmoduleAfterLimits
siCTR_RefPsystem
siCTR_Ref
UmoduleAfterLimits
siCTR_RefUsystem
Module current reference value for the module controller
In single device operation: ≙ RefIsystem after ramp and
internal resistance correction
Value range: 0 – 4000; (4000 ≙ Maximum current)
Device role: Valid for master
System current reference value (set value)
Value range: 0 – 4000;
Single device operation: 4000 ≙ Nominal device current
Multi-unit operation: 4000 ≙ Nominal system current
Reference value via analogue, RS-232, HMI/RCU interface
Device role: Valid for master
Voltage reference value for the module controller
Single device operation: ≙ RefPsystem after ramp and
internal resistance correction
Value range: 0 – 4000; (4000 ≙ Maximum
current)
Device role: Valid for master
Voltage reference value for the module controller
Value range: 0 – 4000;
Single device operation: 4000 ≙ Nominal device power
Multi-unit operation: 4000 ≙ Nominal system power
Reference value via analogue, RS-232, HMI/RCU interface
Device role: Valid for master
Module voltage reference value for the module controller
Single device operation: ≙ RefUsystem after ramp and
internal resistance correction
Value range: 0 – 4000;
(4000 ≙ Maximum voltage)
Device role: Valid for master
System voltage reference value (set value)
Value range: 0 – 4000;
Single device operation: 4000 ≙ Nominal device voltage
Multi-unit operation: 4000 ≙ System nominal voltage
Reference value Via analogue, RS-232,
HMI/RCU interface
Device role: Valid for master
Table 107 Description of the reference values that are allocated to the “Ref.values” group
(set values).
2011-10-18 211 / 298 V00.05b
7