Manual

Manual – TopCon TC.GSS
Appendix
Error list
10.2.2.9. Error group 8) Internal (AD overrange 1)
Group error: 8) Internal (AD overrange 1)
Flash
ing
code
TopControl/HMI
indication
9-5 84) Output
voltage overrange
9-6 85) Output
current
overrange
9-7 86) Sense voltage
overrange
9-8 87) System
voltage overrange
9-9 88) System
current overrange
Description
AD-converter for the
output voltage measurement
at upper limit
AD-converter for the
output current measurement
at upper limit
AD-converter for the
sense voltage measurement
at upper limit
AD-converter for the
RMB voltage measurement
at upper limit
AD-converter for the
RMB current measurement
at upper limit
Possible reason
Measure to rectify
Overvoltage
See above, error 30) *)
Overcurrent
See above, error 21) *)
Overvoltage
See above, error 30) *)
Overvoltage
See above, error 30) *)
Overcurrent
See above, error 21) *)
10.2.2.10. Error group 9) Internal (AD overrange 2)
Group error: 9) Internal (AD overrange 2)
Flashing
code
TopControl/HMI
indication
10-1 90) +5V
overrange
10-2 91) +15V
overrange
10-3 92) -15V
overrange
10-4 93) +24V
overrange
10-5 94) IGBT
temperature
overrange
10-6
95) Rectifier temperature
overrange
Description
AD-converter for the
internal supply monitoring
at upper limit
AD-converter for the
IGBT temperature sensor
at upper limit
AD-converter for the
rectifier temperature
sensor at upper limit
Possible reason
Measure to rectify
Internal supply voltages too high
See above, related supply error (group error 4)
Heat sink temperature lower than approx. 0°C
Operate device at higher ambient temperature
Temperature sensor not connected or faulty
Contact manufacturer
Temperature sensor not connected or faulty
Contact manufacturer
10
2011-10-18 287 / 298 V00.05b