Manual

Manual – TopCon TC.GSS
Support
Producing a standard scope
In the list box -4- select “positive edge”.
-5- button is activated for the entry.
Using the -5- button in the “Select signal” -3-
window, select the trigger signal.
(Here in the example: siCTR_ActUmodule)
Enter the related trigger level.
Start the scope recording using the -6- button.
The button -6- changes function and label to .
The indication changes in the “Status” -7- group.
“Wait for trigger” read-only indication changes to orange.
“Record” read-only indication changes to green.
Storage and indication on the scope are automatic.
(Condition: correctly set trigger parameters)
Save the scope and data using a folder and name of your choice
using the -8- button and the “Save configuration & data as
copy” -9- submenu item.
Send the scope file as part of the contact information to your
sales partner or Regatron support using your e-mail client.
2011-10-18 258 / 298 V00.05b
9