Manual

Manual – TopCon TC.GSS
Analogue interface
Power limit and internal resistance simulation
Internal resistance input as Q4 parameter input
Using a configuration flag the internal resistance input can be used for nQ4
parameter inputs as follows:
1. See standard resistance input parameters
2. ILimitQ4 parameter
RREF:0..10 V≙ 0 … -ILimitQ4;
Where PLimitQ must be specified via TopControl.
3. PLimitQ4 parameter
RREF:0..10 V ≙ 0 … -PLimitQ4;
Where ILimitQ must be specified via TopControl.
If necessary, please contact Regatron support.
2011-10-18 125 / 298 V00.05b
7