Manual

Manual – TopCon TC.GSS
7.4.7.2. Menu – Window
TopControl application
Menu – Window
Fig. 93 Items on the “Window” menu.
Items on the Window menu
1
2
3
4
5
6
7
Communication Debug..., menu item
Indication of the communication between the TopControl application and the
TopCon power supply in a new window.
Only the reference data exchanged are displayed.
Scope Parameters Info..., menu item
All variables and their values from the last scope recording are indicated.
For information on the tab, see chapter 7.4.8.4, Seite 199.
Memory Manager..., user level required: “Power User”
Functions for sending values directly to the TopCon power supply and for
reading values (RAM, flash).
Software Update...
Opens a dialog box using which the following software can be updated:
Firmware: Main DSP, Peripheral DSP, Modulator DSP
Interfaces: CAN+USB interface, GPIB interface
For information on the rest of the procedure, please contact support.
Preferences...
Opens a dialog box for the following entries:
User level to be used to access TopControl.
Default folders for gridfiles, var files and init files.
Option enabling...
Opens a dialog box using which program options can be activated by entering
an enable key.
See procedure in chapter 9.4, page 256.
Functions reserved for the manufacturer
Only for use by the manufacturer!
Table 78 Items on the Window menu.
2
4
6
2011-10-18 169 / 298 V00.05b
1
3
5
7
7