Manual

Manual – TopCon TC.GSS
Device hardware and firmware
Support
Determination of the system information
The tab contains a large amount of information on individual
devices and the multi-unit system, as well as the various firmware
versions in the individual device modules.
The best method is to take a screenshot of the tab
and send it to support as part of the contact information.
Fig. 143 Example – screenshot of the tab with all
information on device hardware and firmware.
For further information on the tab,
see chapter 7.4.8.12, Seite 247.
Alternatively, it is possible to read the software versions for the HMI and
controller board as well as the operating mode via the display for the HMI.
For further information see chapter 7.3.4.3, Seite 137.
2011-10-18 255 / 298 V00.05b
9