Manual

Manual – TopCon TC.GSS
Installation and commissioning
Switching on and off a TopCon power supply
6.3.2. Switching on and off a TopCon power supply
6.3.2.1. Switching on the device
Switch on main switch.
On the front of the TopCon TC.GSS power supply in the form of
a triple switch.
The TopCon power supply is booted.
The signal processor is initialised and a device self-test
performed.
Can be seen on the HMI/RCU during the login process:
Login: HMI login on the system
System information screen:
The system information screen appears for approx. 5 s and
changes to the main screen.
At the end of the successful start process, the green “Power”
LED on the front of the device illuminates.
6.3.2.2. Switching off the device
Switch off the device via the main switch.
The shutdown process is indicated on the front of the TopCon
power supply as a running light on the STATUS LED.
The running light continues until the internal energy stores are
discharged.
2011-10-18 115 / 298 V00.05b
6