Manual

Manual – TopCon TC.GSS
Single device operation – special aspects
Internal system status and troubleshooting
4.3.5. Internal system status and troubleshooting
This section explains the internal control processes. It will help you to
better understand the system messages, in particular warnings and error
messages provided by the device in various ways.
4.3.5.1. Monitoring device-internal processes
The internal processes are monitored using a state machine. For the
correct starting and during the operation of the device, the state machine
works through the following tasks:
The device self-test is started.
The charging of the intermediate circuit is monitored.
It reacts to user commands.
Warning and error flags are polled and the resulting state changes
are made.
2011-10-18 50 / 298 V00.05b
4