Manual

Manual – TopCon TC.GSS
TopControl application
Tab –
“Edit user AAP Base Function” window – parameters
1
2
3
4
5
edit..., list box
Selected reference value is used as output value (Y axis) -5-.
Base Function, list box and button
Selecting “AAP” and clicking the “Edit AAP” button
opens the window for editing AAP functions.
See “Conditions for AAP and user-defined curves”, Seite 193
Input type, list box
Selected reference value is used as input value (X axis) -4-. Reference values
that have not been defined in -1- can be selected.
Read-only indication, X axis1
The reference value that has been selected in -1-.
Read-only indication, Y axis1
The reference value that has been selected in -3-.
Table 96 Editing AAP functions.
1 The related parameter value is always limited by the performance data for the
device.
2011-10-18 198 / 298 V00.05b
7