Manual

Manual – TopCon TC.GSS
Operation of the HMI (option)/RCU (option)
VLS settings (page 2) – DISPLAY 32
VLS settings (page 2) – DISPLAY 32
Fig. 85 VLS settings page 2 – DISPLAY 32
VLS settings page 2 – DISPLAY 32
1
2
3
4
5
1
3
5
VLS settings page 2
Upper limit
Upper Hysteresis
Act--> inact delay 0.0 ms
Act--> inact delay 0.0 ms
VLS page 1 ...
Upper limit or Lower limit, menu item 1 [V], [A], [kW]
Whether the upper limit or lower limit can be entered depends on the function
selected on VLS page 1 (DISPLAY 24).
See Table 64, Seite 151.
Input range:
Voltage 1 : -2*UMax – 2*UMax
Current 1 : -2*IMax – 2*IMax
Power 1 : -2*PMax – 2*PMax
Upper hysteresis or Lower hysteresis, menu item 1 [V], [A], [kW]
Whether the upper hysteresis or lower hysteresis can be entered depends on
the function selected on VLS page 1 (DISPLAY 24).
See Table 64, Seite 151.
Value range:
Voltage 1 : -2*UMax – 2*UMax
Current 1 : -2*IMax – 2*IMax
Power 1 : -2*PMax – 2*PMax
Act--> inact delay, menu item [ms]
Delay from the active to the inactive state.
Value range: 0 ms – 3600 ms; step width: 0.1 ms; default: 0 ms.
Inact--> act delay, menu item [ms]
Delay from the inactive to the active state.
Value range: 0 ms – 3600 ms; step width: 0.1 ms; default: 0 ms.
VLS page 1 ..., navigation item
Return to page 1 of the VLS settings – DISPLAY24
Table 65 VLS settings page 2 – DISPLAY 24
1 Unit is dependent on the source selected on VLS page 1 Table 64.
0
0
2011-10-18 152 / 298 V00.05b
2
4
7
VLS settings page 2
Upper limit
Upper Hysteresis
0
0
Act--> inact delay 0.0 ms
Act--> inact delay 0.0 ms
VLS page 1 ...