FS6200 Server System Implementation Guide - Public Support ...

Appendix A
Building Network Initialization Files
This appendix provides guidelines for building CNS, TCP/IP, and BNA network initialization
files and also includes a preconfigured SNMP initialization file. You can find sample CNS
and TCP/IP initialization files for the FS6200 Server on the Network System Software
NETSYSTEM release media.
The standard set of initialization files is included in the samples:
In addition, a preconfigured SNMP agent initialization file is included on the NETSYSTEM
release media.
If you want to create your own CNS or TCP/IP initialization files, refer to the sample files on
the NETSYSTEM release media and to the “Guidelines for Building CNS Initialization
Files” or “Guidelines for Building TCP/IP Initialization Files” topics later in this appendix. If
you want to create BNA (also known as Heritage Network Services) initialization files, refer
to “Guidelines for Building BNA Initialization Files” later in this appendix.
Preconfigured CNS and TCP/IP Initialization Files
The following subsections describe the CNS and TCP/IP sample initialization files for all
ClearPath Series model groups.
CNS and TCP/IP Initialization Files
These CNS initialization files define the commands preconfigured for ClearPath FS6200
Servers:
• INIT/SAMPLE/CLEARPATH/VNP/DUALIOP/CPMCP1/CNS
• INIT/SAMPLE/CLEARPATH/VNP/DUALIOP/CPMCP1/TCPIP
Guidelines for Building CNS Initialization Files
This subsection provides general guidelines for building a CNS initialization file. The
examples in this subsection are taken from the following file on the NETSYSTEM release
media:
INIT/SAMPLE/CLEARPATH/VNP/DUALIOP/CPMCP1/CNS
• A connection group is required for each network interface
• The first network interface for an I/E Engine has an EVLAN Connection Group and up
8222 3694–000 A–1