13.11.2014 Views

Manual - 8500A Series Peak Power Meter - Giga-tronics

Manual - 8500A Series Peak Power Meter - Giga-tronics

Manual - 8500A Series Peak Power Meter - Giga-tronics

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Series</strong> <strong>8500A</strong> <strong>Peak</strong> <strong>Power</strong> <strong>Meter</strong>s<br />

4.2.5 Analog PC Assembly (A6/A7)<br />

The Analog PC circuitry accepts, converts to digital, and conditions the analog voltage coming from the<br />

channel A and B RF detectors. A6 is the reference designation for the channel A board, and A7 is the<br />

designation for the channel B board. Both boards are configured the same. The Model 8501A meter uses<br />

only A6.<br />

Refer to Figure 4-7 and sheet 1 of schematic diagram #20742 in Chapter 8.<br />

Figure 4-7. Analog PC (A6/A7) Block Diagram<br />

4-20 <strong>Manual</strong> No. 20790, Rev C, November 1998<br />

Superceded by Revision D, March 2009

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!