Manual - 8500A Series Peak Power Meter - Giga-tronics

Series 8500A Peak Power Meters
B.3 MEMory Key Displays
The following menus are activated by repeatedly pressing the MEM key. MEM (1) indicates to press the
key once. MEM (3) indicates to press the MEM key three times.
MEM (1)
Press [MEM] for additional selections
F1 to Recall Setups
F2 to Store Setups
F3 to get Power-On Setup
MEM (2)
Press [CLEAR] to return to data display
F1 to Display Current Setup
F2 to Display Power-On Setup
F3 to Display a Numbered Setup
MEM (3)
Press [CLEAR] to return to data display
F1 to Initialize the Current Setup
F2 to Initialize All but Current Setup
F3 to Initialize a Numbered Setup
B-4 Manual No. 20790, Rev C, November 1998
Superceded by Revision D, March 2009