Manual - 8500A Series Peak Power Meter - Giga-tronics
Manual - 8500A Series Peak Power Meter - Giga-tronics
Manual - 8500A Series Peak Power Meter - Giga-tronics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Series</strong> <strong>8500A</strong> <strong>Peak</strong> <strong>Power</strong> <strong>Meter</strong>s<br />
Function<br />
Command Sequence<br />
Review Detector PROM<br />
Information [MENU] (10) [F2] (for A) or [F3] (for B)<br />
Check Date and Time then Exit<br />
Change Date and Time then Exit<br />
Set Max and Min <strong>Power</strong> Limits<br />
Frequency or Cal Factor or<br />
V/GHz<br />
Recall Setup in Memory (n)<br />
Store Setup in Memory<br />
Recall <strong>Power</strong>-On Setup<br />
Display Current Setup<br />
Display <strong>Power</strong>-On Setup<br />
Display Setup in Memory<br />
Reinitialize Current Setup<br />
Reinitialize All But Current Setup<br />
Reinitialize a Numbered Setup<br />
(nn)<br />
A.3 CW Mode Commands<br />
[MENU] (5) [F3] [F3]<br />
[MENU] (5) [F3] [F1] [mmddyy] [UNITS] [hhmmss] [UNITS] [F3]<br />
[MENU] (7) [F1] [nn.nn] [UNITS] [nn.nn] [dBm]<br />
[FREQ] (follow prompts)<br />
[MEM] (1) [F1] [n] [UNITS]<br />
[MEM] (1) [F2] [n] [UNITS]<br />
[MEM] (1) [F3]<br />
[MEM] (2) [F1] [F1] or [F3] (F1 = more, F3 = exit)<br />
[MEM] (2) [F2] [F1] or [F3] (F1 = more, F3 = exit)<br />
[MEM] (2) [F3] [nn] [UNITS] [F1] (more) or [F3] (exit)<br />
[MEM] (3) [F1]<br />
[MEM] (3) [F2]<br />
[MEM] (3) [F3] [nn] [UNITS]<br />
Function<br />
Select CW Mode<br />
CW Averaging<br />
Fast Analog Output<br />
Command Sequence<br />
[CW]<br />
[MENU] (2) [F1] [nnn] [UNITS]<br />
[MENU] (10) [F1]<br />
A.4 <strong>Peak</strong> Mode Commands<br />
Function<br />
Select <strong>Peak</strong> Mode<br />
Select 8501A Internal Trigger<br />
and Level<br />
Select 8502A Internal Trigger<br />
and Level<br />
Select External Trigger<br />
Fast Analog Output<br />
<strong>Peak</strong> Averaging<br />
Enable Cursor Delay<br />
Disable Cursor Delay<br />
Enter Reference Delay<br />
Clear Reference Delay<br />
Command Sequence<br />
[PEAK]<br />
[MENU] (1) [F1] [nn.nn] [dBm] [mW]<br />
[MENU] (1) [F1] [A] or [B] [nn.nn] [dBm] [mW]<br />
[MENU] (1) [F2]<br />
[MENU] (10) [F1]<br />
[MENU] (2) [F2] nnn [UNITS]<br />
[↑] or [↓]<br />
[UNITS]<br />
[MENU] (4) [F1] (for ch A) or [F2] (for ch B) [nn.nn] [UNITS]<br />
[MENU] (4) [F1] (for ch a and/or [F2] for ch b of the 8502A) [0] [UNITS]<br />
A-2 <strong>Manual</strong> No. 20790, Rev C, November 1998<br />
Superceded by Revision D, March 2009
Change language