Manual - 8500A Series Peak Power Meter - Giga-tronics

Series 8500A Peak Power Meters
User-Defined Detector Calibration Factor Commands
Detector calibration factor for channel A in dB (cc.cc):
DCFAcc.cc
Min Value: -9.99 dB
Max Value: +9.99 dB
Detector calibration factor for channel B in dB (cc.cc):
DCFBcc.cc
Min Value: -9.99 dB
Max Value: +9.99 dB
Sample Program:
10 ! THIS PROGRAM SHOWS HOW TO USE
20 ! THE PPM CAL FACTOR FEATURE
30 !
40 ! CHANNEL A CAL FACTOR
50 ! COMMAND FOR 2.56 dB:
60 OUTPUT 704;DCFA;2.56
70 !
80 ! CHANNEL B CAL FACTOR
90 ! COMMAND FOR 2.56 dB
100 OUTPUT 704;DCFB;2.56
110 !
120 END
Offsetting Measured Data: dB Offset Commands
Channel A offset:
OFFAsnn.nn
(s = polarity; nn.nn = dB value)
Min Value: -40.00 dB
Max Value: +90.00 dB
Channel B offset:
OFFBsnn.nn
(s = polarity; nn.nn = dB value.)
Min Value: -40.00 dB
Max Value: +90.00 dB
3-20 Manual No. 20790, Rev C, November 1998
Superceded by Revision D, March 2009