Manual - 8500A Series Peak Power Meter - Giga-tronics
Manual - 8500A Series Peak Power Meter - Giga-tronics
Manual - 8500A Series Peak Power Meter - Giga-tronics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Series</strong> <strong>8500A</strong> <strong>Peak</strong> <strong>Power</strong> <strong>Meter</strong>s<br />
Troubleshooting 6-3<br />
<strong>Manual</strong> marker placement/timing measurement<br />
commands 3-29<br />
Marker sub-mode commands A-5<br />
Marker sub-mode functions 2-28<br />
Marker timing measurements 3-26<br />
Automatic timing measurement commands 3-28<br />
<strong>Manual</strong> marker placement/timing<br />
measurement commands 3-29<br />
Reference power related commands 3-27<br />
Window and cursor control commands 3-31<br />
Measurement data correction 3-17<br />
Detector PROM correction: External frequency 3-18<br />
Detector PROM correction: User<br />
supplied frequency 3-17<br />
External frequency and output frequency to<br />
controller command 3-19<br />
Offsetting measured data: dB offset commands 3-20<br />
User-defined detector calibration<br />
factor commands 3-20<br />
Measurement Procedures 2-16<br />
Autoscaling procedure 2-19<br />
Autoscaling procedure, external trigger 2-20<br />
Cursor sub-mode functions 2-24<br />
CW power measurement 2-18<br />
Digital Plotting of Graphic Data 2-30<br />
Frequency correction, cal factor and dB offset 2-16<br />
Marker sub-mode functions 2-28<br />
<strong>Peak</strong> power measurement 2-19<br />
<strong>Peak</strong> power measurements (Graph mode) 2-23<br />
PROM frequency correction 2-16<br />
Pulse parameters sub-mode functions 2-26<br />
Pulse, cursor, and marker readouts 2-23<br />
User-supplied cal factor 2-17<br />
Memory features 2-45<br />
Display setups 2-46<br />
Get power-on setup 2-45<br />
Initializing setups 2-46<br />
Recall setup 2-45<br />
Store setup 2-45<br />
MEMory Key Displays B-4<br />
Menu and Memory Keys B-1<br />
MENU Key Displays B-1<br />
1018B emulation mode functions B-3<br />
Normal <strong>8500A</strong> functions B-1<br />
Mode Selection 2-11<br />
CW mode 2-11<br />
Graph Mode 2-13<br />
<strong>Peak</strong> mode 2-11<br />
Mode selection and control 3-21<br />
N<br />
<strong>Peak</strong> power commands 3-21<br />
Related peak power commands 3-22<br />
Select Log or Linear power measurement format<br />
commands 3-21<br />
Select measurement mode commands 3-21<br />
Non-Volatile Memory 2-45<br />
Memory features 2-45<br />
Normal <strong>8500A</strong> functions B-1<br />
Normal PPM operation 3-43<br />
O<br />
Offset 2-17<br />
Offsetting measured data: dB offset commands 3-20<br />
Operation 2-1, 2-10<br />
1018B emulation mode functions B-3<br />
1018B <strong>Peak</strong> <strong>Power</strong> <strong>Meter</strong> Emulation 2-47<br />
CW mode 2-11<br />
Digital Plotting of Graphic Data 2-30<br />
Display Formats C-1<br />
Dual Channel Measurements 2-32<br />
Frequency Display Disable/Enable 2-45<br />
General 2-1<br />
Graph Mode 2-13<br />
High <strong>Power</strong> Measurements 2-37<br />
Installation 2-1<br />
Measurement Procedures 2-16<br />
Memory features 2-45<br />
MEMory Key Displays B-3<br />
Menu and Memory Keys B-1<br />
MENU Key Displays B-1<br />
Mode Selection 2-11<br />
Non-Volatile Memory 2-45<br />
Normal <strong>8500A</strong> functions B-1<br />
<strong>Peak</strong> mode 2-11<br />
<strong>Power</strong>-on self-test 2-10<br />
RF Detectors D-1<br />
Self-Calibration and Auto-Zeroing 2-14<br />
Self-Testing the <strong>8500A</strong> 2-44<br />
Special Capabilities of the PPM 2-40<br />
Summary of Commands A-1<br />
Swept <strong>Peak</strong> <strong>Power</strong> Measurements 2-42<br />
Voltage selector and fuse holder (PCB) 2-3<br />
Voltage selector and fuse holder (VDE) 2-4<br />
Warm Up time and temperature 2-10<br />
Options E-1<br />
Index-4 <strong>Manual</strong> No. 20790, Rev C, November 1998<br />
Superceded by Revision D, March 2009