Manual - 8500A Series Peak Power Meter - Giga-tronics

Index
A5 Test points 4-19
A6/A7 Test points 4-23
A8 Test points 4-26
The microprocessor 4-9
Theory of Operation 4-1
Analog PC assembly (A6/A7) 4-20
Calibrator PC assembly (A12) 4-27
CPU PC assembly (A4) 4-8
Digital delay PC assembly (A5) 4-12
Front panel interface PC assembly (A8) 4-24
GPIB/CAL control PC board (A3) 4-4
Power supply PC assembly (A2) 4-3
System Description 4-1
Tools and test equipment also Series 8500A Peak
Power Meters 1-2
Trig pulse stretcher 4-16
Trig select 4-15
Trig threshold 4-15
Trigger 2-25
Troubleshooting 6-3
Equipment required 6-3
Power-On failure 6-3
Self-test failure indications and possible causes 6-4
Two detectors 3-39
U
Unbuffered memory 4-10
Update data continuously output mode 3-7
Update trigger reset output mode 3-5
User-defined detector calibration factor
commands 3-20
User-supplied cal factor 2-17
Offset 2-17
User-supplied frequency 2-16
V
Voltage hold 4-17
Voltage proportional to frequency test 5-7
Voltage selector
Voltage selector and fuse holder (VDE) 2-4
Voltage selector and fuse holder (PCB) 2-3
Voltage selector and fuse holder (VDE) 2-4
Volume adjust 5-20
W
Warm Up time and temperature 2-10
Window and cursor control commands 3-31
Z
Zero to 25.5 ns delay 4-18
Manual No. 20790, Rev C, November 1998
Superceded by Revision D, March 2009
Index-7