Manual - 8500A Series Peak Power Meter - Giga-tronics
Manual - 8500A Series Peak Power Meter - Giga-tronics
Manual - 8500A Series Peak Power Meter - Giga-tronics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Series</strong> <strong>8500A</strong> <strong>Peak</strong> <strong>Power</strong> <strong>Meter</strong>s<br />
MENU (4)<br />
Menu = NEXT MENU; Minus = PREV MENU<br />
F1 to Enter Detector A Ref Delay<br />
F2 to Enter Detector B Ref Delay<br />
F3 to Select mW Format<br />
NOTE: F2 does not apply to the Model 8501A<br />
MENU (5)<br />
Menu = NEXT MENU; Minus = PREV MENU<br />
F1 to Enter Code Number<br />
F2 to Enter Part Number<br />
F3 for Read and Set Time<br />
MENU (6)<br />
Menu = NEXTR MENU; Minus = PREV MENU<br />
F1 to Abort Current Plotting Activity<br />
F2 to Enter Plotter Address<br />
F3 to Enter <strong>8500A</strong> Listen and Talk Address<br />
MENU (7)<br />
Menu = NEXT MENU; Minus = PREV MENU<br />
F1 to Set Max and Min <strong>Power</strong> Limits<br />
F2 to Select Ratio Display Mode<br />
F3: Hide (or Display) Frequency Information<br />
NOTE: F2 does not apply to the Model 8501A<br />
MENU (8)<br />
Menu = NEXT MENU; Minus = PREV MENU<br />
F2: Emulate 1018B<br />
MENU (9)<br />
Menu = NEXT MENU; Minus = PREV MENU<br />
F1 to Program Detector PROM<br />
F2 to Set Initial Dly Value for Autoscaling<br />
F3 to Set Averaging Value for Autoscaling<br />
NOTE: The MENU (9) F1 function is designed to be used only in conjunction with<br />
the <strong>Giga</strong>-<strong>tronics</strong> PROM Programming Accessory Kit<br />
If F1 is pressed without any requirement for using the PROM programming device,<br />
a long series of sub-menus must be stepped through to escape from the routine. To<br />
circumvent this, press the RESET button on the rear of the instrument to escape<br />
back to the last measurement mode.<br />
MENU (10)<br />
Press CLEAR to return to data display<br />
F1 for Fast Analog Output<br />
F2: Review A Detector PROM<br />
F3: Review B Detector PROM (8502A only)<br />
B-2 <strong>Manual</strong> No. 20790, Rev C, November 1998<br />
Superceded by Revision D, March 2009
Change language