Manual - 8500A Series Peak Power Meter - Giga-tronics

E
Options
E.1 Introduction
The following options are available for Series 8500A, and are discussed under respective headings:
Option 01: Rack Mount Kit, 16657
Option 03: Rear Panel Connections
Parts lists are included with the applicable option in this appendix. Diagrams for options, when
applicable, are in Chapter 8.
E.2 Option 01: Rack Mount Kit
Option 01 is a 19-inch standard equipment rack mounting kit for the Series 8500A power meter. It
includes slides and wall mounting brackets.
16657 OPT 01 RACK MT 5 1/4 (8501/02), Rev: B
Item Part Number Qty Cage Mfr’s Part Number Description
1 12678-002 1 58900 12678-002 SLIDE-RACK SECTIONS (PAIR)
2 12678-001 1 58900 12678-001 SLIDE-CHASSIS SECTION (PAIR)
3 10351-001 2 58900 10351-001 ROUND NICKEL HANDLE
4 20077 1 58900 20077 BRACKET,RACK MOUNT, 5.25 (L)
5 20078 1 58900 20078 BRACKET,RACK MOUNT, 5.25" (R)
6 10352 4 58900 10352 HANDLE FERRULE
7 13854 6 58900 13854 SPACER, .172IDX.500ODX.31LG
8 20074 1 58900 20074 MOUNTING BLOCK, LEFT
9 20075 1 58900 20075 MOUNTING BLOCK, RIGHT
10 10415 1 58900 10415 LABEL, OPTION IDENTIFICATION
101 10111-005 6 58900 10111-005 8-32 X 5/8 PAN
102 13603-001 2 58900 13603-001 8-32 X 1/2 FLAT 100 DEG
103 HWSS-80400 6 58900 HWSS-80400 #8 X 1/4 SPLIT LOCK
104 HBFP-A3206 4 58900 HBFP-A3206 10-32 X 3/8 FLAT
105 HBPP-83206 4 26233 NS137CR832R6 8-32 X 3/8 PAN
Manual No. 20790, Rev C, November 1998 E-1
Superceded by Revision D, March 2009