Manual - 8500A Series Peak Power Meter - Giga-tronics

Operation
2. Move the cursor (using the up or down arrow keys) to the MKR 2-1= line on the display. The
current marker percentage setting for marker 1 will be displayed.
3. Enter the desired Marker 1 percentage through the numeric keypad, using any Units key to
terminate the entry.
4. Repeat steps 2 and 3 at the MKR 3-2 = line to change the Marker 2 percentage, and the MKR
4-3 = line to change the Marker 3 percentage. To change the Marker 4 percentage, move the
cursor to the blank line just below the MKR 4-3 = line.
Manual No. 20790, Rev C, November 1998 2-29
Superceded by Revision D, March 2009