Software Manual Freedom EVOware Standard 2.3 Freedom ...

A - Appendix A
ASTM Interface Module
The File Parser can be minimized to a system tray icon (button) at the bottom right
of the screen. Double-click on the icon or choose Restore if you want to maximize
the ASTM File Parser dialog box.
Right click on the system tray icon to open the context menu. The available
choices are Restore, About and Exit.
The File Parser has two modes: Run and Pause. Switch between the two modes
by clicking the large buttons at the top of the dialog box:
Fig. A-52 ASTM Extensions File Parser - Info tab
The current mode is shown at the bottom left of the dialog box and also by the
appearance of the system tray icon.
The File Parser runs as a separate process in the background. It continuously
polls the configured input directory for CSV files. When it detects a file, it is
automatically parsed, converted to the ASTM data model and sent to the LIMS
through the configured serial connection.
A success message is displayed in the Info tab of the dialog box when the file has
been transferred. The file is then moved to the configured “processed” directory.
The processing date and the processing time are appended to the original file
name.
If errors are detected during parsing (e.g. the file structure does not match the
parser configuration), an error message is displayed in the Error tab of the dialog
box and the file is moved to the configured “errors” directory. The processing date
and the processing time are appended to the original file name.
Success or failure is also indicated by a notification balloon in the system tray
area of the screen.
Remove the shortcut “ASTM Extensions File Parser” from the MS Windows
Autostart folder if you want to prevent the File Parser from starting each time the
PC is started. You can start this tool manually with the shortcut in Start > All
Programs > Tecan > EVOware > ASTM Extensions.
Freedom EVOware Software Manual, 393172, en, V2.3 A - 91