Software Manual Freedom EVOware Standard 2.3 Freedom ...

8 - Configuration Tool
General Settings
8.3.1.3 Scheduler Tab
The settings in the Scheduler tab are only relevant for Freedom EVOware Plus.
Fig. 8-2
Configuring the Scheduler
Common panel
Timeslice
The Timeslice field specifies the smallest unit of time (scheduling tick) which
the scheduler should use to calculate and optimize processes. With the
default setting of 5 seconds, the scheduler checks every 5 seconds whether
rescheduling is possible or necessary. Increasing this value will speed up the
scheduling process whereas lower values may increase the throughput of the
process (e.g. microplates per hour).
Note: The scheduler can handle a maximum of 65,000 timeslices. The maximum
runtime is then roughly 90 hours with a timeslice setting of 5 seconds. If
necessary, the system specialist can increase the maximum number of timeslices
for advanced applications.
Freedom EVOware Software Manual, 393172, en, V2.3 8 - 5