Software Manual Freedom EVOware Standard 2.3 Freedom ...

A - Appendix A
System Tools for Freedom EVOware
Driver Name
This field specifies the name of the device driver. A suitable name will be
suggested. You can specify a different name if required.
If you specify the same driver name as the one you copied, Freedom
EVOware Plus treats them as a parallel resource, and the scheduler will
automatically choose one of the physical devices during process runtime,
depending on which one is free. The parallel resources should normally be
configured to function identically (e.g. same washing liquid or same incubation
temperature).
Parallel resources are not relevant in Freedom EVOware Standard.
Display Name
Specify the required name for the device in the Control Bar. It is
recommended to choose a unique, descriptive display name (e.g. Te-Shake 2
or Te-Shake 90 degrees).
If you want to delete a device driver, select the driver in the list and click the
Delete button in the toolbar . You will be prompted to confirm the deletion.
Note: If you delete all copies of the device driver, you must re-install the device
with the installation program if you want to use the device again later.
A.9.4 Export/Import Tool
This tool is used to exchange processes and scripts, robot vectors and liquid
class, carrier and labware definitions with other Freedom EVOware installations.
In contrast to earlier Tecan pipetting software products such as Gemini, you must
not simply copy the carrier database file carrier.cfg from one Freedom EVOware
installation to another. You must use the Export/Import tool instead.
Start this tool with the shortcut in Start > All Programs > Tecan > EVOware > Tools
(please exit Freedom EVOware first):
A - 38 Freedom EVOware Software Manual, 393172, en, V2.3