Software Manual Freedom EVOware Standard 2.3 Freedom ...

18 - Error Handling
Error Dialogs
18.1.23 WRC/Te-MO Error
The Wash & Refill Center is a supporting device for the Te-MO which is connected
to the Te-MO wash block through tubing. The following dialog box is shown if the
Te-MO or the WRC reports an error, with the exception of the errors WRC empty
and WRC overflow, which are described in 18.1.24 “WRC Errors”, 18-24.
The dialog box shows the pipetting instrument error number and a brief
description of the error, such as “Waste bottle 1 empty’:
Fig. 18-24 WRC/Te-MO Error dialog box
Note: The pipetting instrument error number is not the same as the Freedom
EVOware error message ID.
The buttons in the dialog box are as follows:
Retry
If you click this button, Freedom EVOware will resend the command to the
pipetting instrument.
Ignore
If you click this button, Freedom EVOware will ignore the error and continue
with the pipetting script. Please be careful with this option. Ignoring errors can
lead to further errors.
Abort
If you click this button, the current command is completed without sending any
more firmware commands (e.g. movement commands) to the pipetting
instrument and the script is stopped. Freedom EVOware then switches to
offline mode. To cancel offline mode and resume normal pipetting, choose
Switch to real mode in the Execute menu or restart Freedom EVOware.
Freedom EVOware Software Manual, 393172, en, V2.3 18 - 23