Software Manual Freedom EVOware Standard 2.3 Freedom ...

15 - Script Commands
MCA Merge Plate Wizard
15.32.4 Transfer Wizard, Step 4 of 4
Select the position of the destination wells:
Fig. 15-55 Transfer wizard, step 4 of 4
Select the position of the destination wells
Select the position of the destination wells by clicking with the mouse. All of
the wells are in the same column.
Click Finish Wizard when you have made all of your entries. This creates a set of
script commands which carry out the required actions.
Note: Click the “-” button in the Wizard command icon in the Script Editor if you
want to collapse and hide all of the script lines between Wizard and Wizard End.
The “-” button changes to “+”. Click the “+” button to show the script lines again.
15.33 MCA Merge Plate Wizard
The MCA Merge Plate wizard creates a set of script commands for the MCA96
which merge four 96-well microplates into one 384-well microplate.
After you have completed all of the steps in the wizard, it creates script commands
which carry out the required actions and inserts them in the Script Editor window
at the currently selected position. If necessary, the script commands can then be
edited if you want to include some special features.
15.33.1 MCA Merge Plate Wizard, Step 1 of 4
Specify the general settings for the MCA Merge Plate wizard:
15 - 90 Freedom EVOware Software Manual, 393172, en, V2.3