Software Manual Freedom EVOware Standard 2.3 Freedom ...

A - Appendix A
System Tools for Freedom EVOware
Fig. A-29 Registration Wizard - Collecting information
The next step is to configure all of the carriers you have chosen.
In the list, carriers which can be accessed by the LiHa are labelled Check ...
Carriers which can only be accessed by the RoMa are labelled Teach ...
For each of the carriers in turn, click on the entry and click Go. This opens the Edit
Carrier dialog box in Freedom EVOware (see 9.5 “Configuring Carriers”, 9-39).
Check that the dimensions in the dialog box match the dimensions of your carriers
and check and/or teach the RoMa vectors that you need (see 9.6 “Creating and
Editing Plate Robot Vectors”, 9-55).
A.9.10.8 Labware Setup
This step is used to configure the worktable with the labware which is needed by
your application. It starts Freedom EVOware to allow you to use the Worktable
Editor. See 11.4.1 “Choosing Labware for a Pipetting Script”, 11-4 for more
information.
After setting up the worktable, to return to the IQ Wizard you must save the results
as a pipetting script (which does not yet contain any script commands). To do this,
chose Save in the File menu. After returning to the IQ Wizard, it will list all of the
labware items you have chosen to use:
Fig. A-30 Registration Wizard - Collecting information
The next step is to configure all of the labware you have chosen.
A - 62 Freedom EVOware Software Manual, 393172, en, V2.3