Software Manual Freedom EVOware Standard 2.3 Freedom ...

15 - Script Commands
Te-Fill Switch Valve Command
Channel / Liquid
If the Te-Fill is fitted with the 6-way valve option, choose the channel (liquid
container) you want to use. The pull-down list is not available if the 6-way
valve is not present and/or not activated.
During runtime, the pipetting instrument will select the correct liquid channel
automatically - you do not need to use the Te-Fill Switch Valve command for
this purpose.
Speed
Specify the required priming speed for each tip. The available range depends
on how many tips you have selected. The Te-Fill pump has a range of 8 to 80
ml/min. If you have selected e.g. four tips, the range for this field is 2 to 20 ml/
min.
15.17 Te-Fill Switch Valve Command
The Te-Fill option uses a bi-directional pump instead of the diluter to aspirate and
dispense large volumes of liquid, for example buffer solutions.
The Te-Fill can be optionally equipped with a 6-way valve, which allows you to
switch between six different liquid containers. If fitted, the 6-way valve must be
activated in the Configuration Tool (see 8.4.2.4 “Te-Fill option”, 8-30). Also use
the Configuration Tool to assign the names of the liquids you want to use to the
channels of the 6-way valve (see 8.4.2.6 “6-way valve for Te-Fill”, 8-31). The
assigned names will then be shown in this command in the Channel / Liquid pulldown
list.
With the Te-Fill Aspirate, Dispense and Prime commands, the pipetting instrument
will switch during runtime from using the diluter to using the bi-directional pump
and switch back again after pipetting - you do not need to use the Te-Fill Switch
Valve command for this purpose.
The Te-Fill Switch Valve command is used for special applications which require
the Te-Fill liquid path to be selected but without aspirating or dispensing.
Fig. 15-17 Te-Fill Switch Valve command
The parameters of the Te-Fill Switch Valve command are as follows:
15 - 28 Freedom EVOware Software Manual, 393172, en, V2.3