Software Manual Freedom EVOware Standard 2.3 Freedom ...

9 - Specifying Your Instrument Setup
Configuring Carriers
9.5.5.6 Incubator Carrier Attributes
See 8.5.8 “Settings for Heated Incubators 1 to 3”, 8-55 for information on logical
incubators.
9.5.5.7 Pooling Balance Carrier Attributes
The additional attributes which you can configure for the Mettler pooling balance
are as follows:
Tab. 9-31 Carrier attributes, Mettler pooling balance
Field name Default value Description
Carrier is a pooling
balance
Enforce tip-wise dispensing
No
No
Choose Yes if the balance is a pooling balance.
See 10.1.1 “Global Parameters for Liquid
Classes”, 10-4, Liquid Arrival Check for
more information.
The Liquid Arrival Check feature normally verifies
that the correct liquid volumes have been
dispensed by weighing the labware after
pipetting from all of the tips which are selected
in the pipetting command. If a volume discrepancy
is detected, it is not possible to identify
which tip has pipetted inaccurately. Choose
Yes if you want to verify the pipetted volume
for each tip separately. The pipetting operation
will take significantly longer in this case.
See 9.5.5.1 “Labware Carrier Attributes”, 9-49 for descriptions of the other
attributes.
For more information on the pooling balance, see Liquid Arrival Check in
10.1.1 “Global Parameters for Liquid Classes”, 10-4.
9.5.5.8 Te-Shake Carrier Attributes
The additional attributes which you can configure for the Te-Shake carrier are as
follows:
Tab. 9-32 Carrier attributes, Te-Shake
Field name Default value Description
Server Shaker Specify the call name for the device (the internal
name of the device driver).
DeviceIDs a)
7 Hardware address of the shaker plus 1. Readonly
field - please set this attribute with the
Settings tab of the Te-Shake driver in the Configuration
Tool.
Has heater a) 0 Specify 1 if the shaker is fitted with the heater
option.
Init temperature a) 0 If the shaker is fitted with the heater option,
specify the initial temperature.
a) Hidden attribute. Click the Show hidden attributes checkbox to make it visible.
Freedom EVOware Software Manual, 393172, en, V2.3 9 - 53