Software Manual Freedom EVOware Standard 2.3 Freedom ...

A - Appendix A
Advanced Worklist Commands
Tab. A-30 Advanced worklist command Active_Wash, parameters
Par. Name Type Range Explanation
1 selection integer 0 - 1 selection:
0 = Wait until termination of command
1 = Continue with script without waiting
for termination
2 time integer 1 - 999 Time of pump activation in seconds
3 arm integer 0 - 1 number of the LiHa performing the
action:
0 = LiHa 1
1 = LiHa 2
Example:
Active_Wash(0,5,0);
A.15.4.17 Export Data (Worklist: Export)
The advanced worklist command which corresponds to the Export Data script
command is “Export”.
The parameters of the advanced worklist command are shown in the following
table. For more information on this command see 15.26 “Export Data Command”,
15-48.
Tab. A-31 Advanced worklist command Export, parameters
Par. Name Type Range Explanation
1 exportAll integer 0 - 1 1 = export all labware items on worktable
2 formats integer 0 - 63 bit-coded output file format:
1 = lotus
2 = dbase
4 = excel
8 = paradox
16 = quattro
32 = text with delimiters
3 delete integer 0 - 1 1 = don't export already exported data
again later
4 compress integer 0 - 1 1 = create only one record per well
Freedom EVOware Software Manual, 393172, en, V2.3 A - 135