Software Manual Freedom EVOware Standard 2.3 Freedom ...

18 - Error Handling
List of Error Messages
Tab. 18-1 List of error messages (cont.)
Error ID Message Text Reason Corrective Measure
EVO_EVO_014_006
There are schedules stored for this
process. If the process is changed
these schedules will be lost.
To keep the original version with it's
schedules please use 'Save As' to
store the changed process under a
new name.
Save process under same name and
loose schedules?
n.a.
n.a.
EVO_EVO_015_000 Error opening Named Pipe Named Pipe could not be
opend in “Command”
command
• Check pipe name provided
in command
• Wait until pipe is available
EVO_EVO_016_002 Enter Barcode (PosID-2) Refer to 18.1.16, 18-16
EVO_EVO_016_003 Barcode Error (PosID-2) Refer to 18.1.12, 18-13
EVO_EVO_016_004 Clot Error Refer to 18.1.2, 18-2
EVO_EVO_016_005 Dilutor Overflow Refer to 18.1.6, 18-6
EVO_EVO_016_006 Dilutor Error Refer to 18.1.7, 18-7
EVO_EVO_016_007 DITI Already Mounted Refer to 18.1.11, 18-12
EVO_EVO_016_008 Error Fetching DITIs Refer to 18.1.8, 18-9
EVO_EVO_016_009 Te-MO DITI Error Refer to 18.1.22, 18-22
EVO_EVO_016_010 Lost DITI Refer to 18.1.10, 18-11
EVO_EVO_016_011 Doorlock Error Refer to 18.1.19, 18-19
EVO_EVO_016_023 Liquid Arrival Check Error Refer to 18.1.5, 18-5
EVO_EVO_016_024 Liquid Detection Error Refer to 18.1.1, 18-1
EVO_EVO_016_036 Grip Error Refer to 18.1.20, 18-20
EVO_EVO_016_040 Instrument Error dialog box Refer to 18.1.18, 18-18
EVO_EVO_016_042 Te-Stack Error Refer to 18.1.21.1, 18-21
EVO_EVO_016_043 Vacuum Waste Container Refer to 18.1.26, 18-27
EVO_EVO_016_048 WinWash Liquid Error Refer to 18.1.25, 18-26
EVO_EVO_016_049 WRC/Te-MO Error Refer to 18.1.23, 18-23
EVO_EVO_016_052 Clot Error (PMP) Refer to 18.1.3, 18-3
EVO_EVO_016_053 PMP Instrument Error Refer to 18.1.4, 18-4
EVO_EVO_017_000
A Te-MO has been detected but is
not on the worktable.
Evoware now prohibits LiHa access
to the rear of the instrument.
n.a.
n.a.
18 - 56 Freedom EVOware Software Manual, 393172, en, V2.3