Software Manual Freedom EVOware Standard 2.3 Freedom ...

18 - Error Handling
Editing Messages in Message Boxes
Prepare Waste
If the waste bottle is full, the “Waste” icon will be red. In this case, click the
Prepare Waste button to collapse the vacuum in the waste bottle to allow it to
be emptied. When you have emptied the waste bottle, the “Waste” icon will
turn to green and the Prepare Waste button will be replaced by a Stop button.
Click the Stop button to activate the vacuum pump again.
Close
Click this button to close the dialog box. The Close button is only active if the
error condition has been resolved by following the procedure described
above.
18.2 Editing Messages in Message Boxes
Messages in Freedom EVOware which are displayed in a message box use a
standard layout as follows:
Fig. 18-31 Freedom EVOware message box - Normal view
In the case of error messages, the Error ID is shown at the top of the message
box. For a list of Error IDs see 18.3 “List of Error Messages”, 18-32.
If required, you can add more information to each message, such as a reason for
the message and a possible solution. The user-defined texts are saved in
Freedom EVOware and appear each time the message is displayed. For
example, the additional information can refer to procedures which are specific to
the laboratory’s standard workflow.
Note: Choose Error History in the Help menu to see a list of the last 20
information or error messages which were displayed while using Freedom
EVOware. Double-click on an entry in the list to see the details of the message.
• If you open the message from the Error History menu item, the buttons are
the bottom of the message are inctivate (grey) because the script or process
is no longer running (see Yes and No buttons in above screen shot).
To edit the message texts, click in the message box to switch to edit view:
Freedom EVOware Software Manual, 393172, en, V2.3 18 - 29