Software Manual Freedom EVOware Standard 2.3 Freedom ...

A - Appendix A
Advanced Worklist Commands
Tab. A-43 Advanced worklist command Wash-Multipip, parameters (cont.)
Par. Name Type Range Explanation
8 Washliquid string1 Wash liquid to use in step (container 1 or
container 2)
9 Flowthrough string1 1 - 100 WRC flow rate for step (%)
10 Change string1 Wash liquid change for cleaner step
(ignored for empty tips step: pad with 0)
11 Preflush string1 0 - 1000 Preflush time for step, seconds
12 Postflush string1 0 - 1000 Postflush time for step, seconds
a) The minimum (cleanerSteps=1) is one Empty Tips step followed by one Cleaner step. This requires two
sets of the parameters 2 - 12.
Example with one Empty Tips step and two Cleaner steps:
Wash-Multipip(2,22,9,"384 DMSO",5,1,1,1,40,0,0,0,22,9,"384
DMSO",5,5,1,1,50,0,5,0,22,9,"384 DMSO",5,1,1,1,50,0,0,0);
A.15.4.30 Te-MO 384 Wash Tip Head (Worklist: Wash-TeMO-384)
The advanced worklist command which corresponds to the Te-MO 384 Wash Tip
Head script command is “Wash_Multipip_384”. This advanced worklist command
can only be used in Freedom EVOware Standard.
The parameters of the advanced worklist command are shown in the following
table. For more information on this command see 15.56.5 “Te-MO 384 Wash Tip
Head Command”, 15-130.
Tab. A-44 Advanced worklist command Wash_Multipip_384, parameters
Par. Name Type Range Explanation
1 flushTime floating point 0.1 - 50 Flush time in wash block
2 flushTimeout floating point 0.1 Always specify 0.1
3 washTime floating point 0.1 - 50 Wash time in wash block
4 washTimeout floating point 30 Always specify 30
5 washStationID integer 0 - grid position and site of the wash bloc,
coded as follows: washStationID = grid *
256 + site
6 quickFlush integer 0 - 1 1 = Use quick flush
7 plungerWash integer 1 = Tip washing with plunger moves
8 washCyles string1 Wash cycles
9 washVolume string1 1 - 100 Wash volume
10 washSpeed string1 Wash speed
12 postflush integer 0 - 1 1 = Flush tips after plunger moves
Example:
A - 144 Freedom EVOware Software Manual, 393172, en, V2.3