Software Manual Freedom EVOware Standard 2.3 Freedom ...

8 - Configuration Tool
Device Settings
Tab. 8-2 Max. dilutor speeds for the LiHa (pipetting or washing)
Dilutor capacity Max. dilutor speed Max. breakoff speed
25 µl 21 µl/s 11 µl/s
50 µl 42 µl/s 23 µl/s
100 µl 83 µl/s 45 µl/s
250 µl 208 µl/s 113 µl/s
500 µl 417 µl/s 225 µl/s
1000 µl 833 µl/s 450 µl/s
2500 µl 2083 µl/s 1125 µl/s
5000 µl 4167 µl/s 2250 µl/s
The breakoff speed is the recommended final dilutor speed when dispensing. See
10.2.2 “LiHa Dispense Parameters (Fixed Tips and DiTis)”, 10-12.
If you are using the XLP dilutor pump in high resolution mode, the maximum
dilutor speeds are 12.5% of the values given in the above table (Freedom
EVOware calculates an appropriate value for the XLP dilutor pump automatically).
Offline tab
Click the Offline tab to specify the required configuration of the liquid handling arm
and the tip parameters if Freedom EVOware is running in offline mode. See
Instrument tab, above, for a description of the parameters.
Copy machine parameters
Click this button to copy the current parameters from the Instrument tab to the
Offline tab. This allows you to create processes and scripts in offline mode
without having to specify all of the liquid handling settings manually.
8.4.2.2 PosID (Moveable Barcode Scanner)
This tab is used to specify custom command strings for the PosID (Positive
Identification System). The PosID is a movable barcode scanner which can be
used to read the barcode labels on carriers, labware and tubes. Note: The allowed
barcode types are configured with the PosID command (see 15.63 “PosID
Command”, 15-150). This tab is not shown if you have installed the driver for
the PosID-3 barcode scanner, which supercedes the PosID barcode scanner.
8 - 28 Freedom EVOware Software Manual, 393172, en, V2.3