Software Manual Freedom EVOware Standard 2.3 Freedom ...

18 - Error Handling
Error Dialogs
Dispense back into vessel, then retry
If you click this button, Freedom EVOware will dispense the aspirated volume
back into the vessel and will retry the liquid level detection, aspiration, and clot
detection.
Dispense back into vessel, then pipette nothing
If you click this button, Freedom EVOware will dispense the aspirated volume
back into the vessel and will not use the affected tip(s) until the next Wash
Tips or Get DITIs operation.
The affected wells won't be reported any more in the output files.
Go on with clot
If you click this button, Freedom EVOware will continue with the pipetting
script and report the clot error in the output file(s).
Continue, ignore clot error
If you click this button, Freedom EVOware will continue with the pipetting
script and report “clot error ignored” in the output file(s).
See also 10.2.1 “LiHa Aspirate Parameters (Fixed Tips and DiTis)”, 10-7, On
Exit Signal Error.
18.1.3 Clot Error (PMP)
The following dialog box is shown if the PMP (Pressure Monitored Pipetting)
hardware option detects a clot during pipetting.
PMP is only available for LiHa DITI tips. The dialog box shows the respective tip
or tips and the tip status:
Fig. 18-3 Clot Error (PMP) dialog box
The buttons in the dialog box are as follows. The actions described only apply to
the affected tip positions - if the pipetting script is allowed to continue, the other
tips will be handled in the normal way.
Freedom EVOware Software Manual, 393172, en, V2.3 18 - 3